3.5 Freescale MMA8452 accelerometer driver.3.4 Create u-boot boardconfigs and dts for sunxi boards which do not have a defconfig / dts file yet.3.3 Create dts files for sunxi boards which do not have a dts file yet.

3.2 Add support for edp display panels via the anx9804 parallel lcd to dp bridge chip.

2.2 Add support to u-boot for booting from NAND.

2.1 Enable the OTG USB port on all Allwinner boards.

1.29 Add support for vga out via the chrontel ch7026 parallel lcd to vga bridge chip.

1.28 Convert sunxi u-boot i2c code to the device-model.

1.27 Various sunxi kernel support tasks.

1.26 gpio driver for CP210x usb to tty serial adapters.

1.25 Kernel modesetting driver for sis chipset usb to vga adapters.

1.24 Kernel modesetting driver for am7xxx based usb pico projectors.

1.23 Rework Raspberry Pi 2 kernel code for multi platform support.

1.22 CSI camera interface driver + sensor drivers.

1.20 Mediatek mt6620 wifi / bluetooth driver.1.17 brcmfmac sdio support improvements.1.16 Add support for peripheral only mode to sunxi musb and usb-phy code.1.12 Add vbus-supply regulator support to the mv64xxx i2c controller driver.

1.11 Bosch? mc32x0 accelerometer driver.

1.9 Memsic MXC622X accelerometer driver.

1.8 Freescale MMA7660 accelerometer driver.

1.4 Add an i2c controller and axp152 child node to boards using an axp152 pmic.

1.3 Add regulator nodes to the dts files of all boards with an axp221 pmic.

1.2 Add regulator nodes to the dts files of all boards with an axp209 pmic.

1.1 Create a dts file and u-boot defconfig for uhost-u1a.

Drivers allwinner a20 tablet